Continuous Emissions Monitoring Systems

Continuous Emissions Monitoring Systems (CEMS)

Range of monitors and analysers for the continuous monitoring of emissions from process and industrial stacks. Systems for particulates, solvents VOC, TOC and gases.

MCA 04 Multi Stack Analyser

The MCA 04 is a single beam photometer, working on the principle of the absorption of infrared light. The unit has an extractive sampling system and up to 8 gas components can be measured at the same time: maximum 7 infrared active gases (e.g. CO, NO, NO₂, SO₂ , HCl, NH₃, H₂O, CO₂) and O₂ with an extractive circonium oxid cell as well as optionally TOC with a flame ionisation detector.

MCA 23 Multi Stack Analyser

The MGA 23 gas analyser can measure up to 4 gas components at once: A maximum of three infrared sensitive gases such as CO,CO₂, NO, SO₂, CH₄, R22 (Freon CHCIF₂) and O₂ with an electrochemical oxygen measuring cell.

Lab aqueous mercury analyser

The LabAnalyzer 254 gas analyser is used for quantitative determination of mercury in aqueous samples and sample digests.

Mercury tracker 3000

The Mercury Tracker 3000 serves for measurement of the mercury concentration in air and other gases.

Volatile Organic Compounds (VOC)

Fixed Flame Ionisation Detector (FID)

The Thermo-FID can be configured to fit into a 19” system rack or to be used as a stand alone analyser, measuring Organic Carbon Volatile Organic Compounds’s (VOC’s) at ppm or LEL levels.

Multi-Gas Calibration Systems

range of systems both fixed and mobile comprising a range of analysers for the detection of ambient gases down to PPB level. Generally used for air quality networks, roadside monitoring or industrial boundaries.

Multi Gas Blenders
Units are microprocessor controlled instruments for dynamic calibration of ambient air analysers. The instrument automatically performs zero, precision, span and multi-point calibrations using NO, NO₂, SO₂, CO, O₃, hydrocarbons and other required calibration gases.