Insight from Casella

Applications

• Occupational Exposure Assessment
• Compliance with Health & Safety Legislation
• Record Keeping of Occupation Exposures
• Reducing Occupational Exposure
• Exposure Source Identification

Simple Instrument Configuration and Download

When an instrument is connected to Casella insight, it will automatically download stored data. Instruments can also be configured and controlled. If a new instrument is purchased, Casella insight can be remotely upgraded to activate the relevant ‘plug-in’. With occupational monitoring equipment, legislation requires periodic calibration to be performed. Casella insight will manage all your calibration dates and notify you when they are due, as well as storing calibration certificates. Users of existing Casella software packages can import previously downloaded data. Likewise, data within Casella insight can easily be exported and sent to other colleagues or users, allowing data to easily be shared across organisations.

 

Easy Data and Exposure Analysis

Exposure levels can be colour coded by a simple ‘traffic light’ system, it is easy to see which individuals or locations exceeding action levels. Predefined action levels are provided for local legislation or can be defined as necessary. Graphs can be further anaylsed by adding zones (shown right) which subsequently provides exposure levels inside and outside these zones. This allows the exclusion of extraneous events, breaks etc to provide comparative exposure calculations. Any exclusion zones added to data are retained with the data file.

 

 

Manage Exposure Data

A simple ‘tree view’ can be created with which to store and manage data by person, place or process. Once data is downloaded, fi les can be dragged and dropped to the relevant tree location and all data is stored within a central database. Templates are provided to view data for local legislation (e.g.OSHA) or can be customised, displayed and reported simply or comprehensively as required.

 

 

 

Easily Generate Reports

Exposure data from multiple hazards such as noise and dust can be viewed and reported simultaneously. Reports can be stored in multiple formats (e.g .pdf, .jpg, or .csv) allowing them to be shared and viewed easily, as well as exported to other applications. To create a report, simply 'right click' on the appropriate part of the tree view and the report wizard allows creation of a report for people, processes etc from that part of the tree. The integral report wizard allows reported parameters to be selected as required and report settings are retained for the next time it is used.

Notes can be added to data, which appear on reports as required. This information could include details about the measurement and subsequent recommendations or actions required to reduce exposure.